CMT 659.023.11 Chamfer Bits w/Insert Knives 63/64" x 7/16" (22 degrees) S=1/4" Framing Angles and Plates Galvanized Top-Flange Concrete and Masonry

Galvanized Top-Flange Concrete and Masonry Hanger by Simpson Strong-Tie is a single-piece

Built from 7-gauge steel with a hot-dip galvanized finish

When installing ties on plated trusses on the side opposite the truss plate

eliminating tearout on both the top and bottom

precut galvanized steel strap engineered to resist tension loads in floor-to-floor and other structural connections

CMT 659.023.11 Chamfer Bits w/Insert Knives 63/64" x 7/16" (22 degrees) S=1/4" Framing Angles and Plates Galvanized Top-Flange Concrete and MasonryThe CMT 659. 023. 11 is a 63 64" diameter chamfer router bit with two replaceable insert knives and 1 4" shank. Cuts a 22 degrees chamfer bevel on edges and profiles in hardwood, softwood, MDF, and laminates. Use on portable routers; bearing guide eliminates the need for counter profiles. SPECIFICATIONS Order Number 659. 023. 11 Cutting Diameter 63 64" Chamfer Angle 22 degrees Cutting Length (I) 7 16" Shank Diameter 1 4" Overall Length 2 15 32" Number