Aluminum 3" Male Camlock x 3" Male Camlock Maximum PSI_250 psi The fire hydrant marker is

The fire hydrant marker is adaptable to most standard fire hydrants with an easy to install 5/8 inch diameter bolt-on steel flat mounting bracket

The male threaded side of this adapter will only connect to a 5 inch female National Pipe Tapered (NPT) or National Pipe Straight Hose (NPSH) thread

respectively

This strainer is installed with the strainer holes facing down

This pump meets or exceeds the testing standards for NFPA 1962

Aluminum 3" Male Camlock x 3" Male Camlock Maximum PSI_250 psi The fire hydrant marker isGlobal type "A" aluminum 3 inch male camlock (Cam & Groove) coupler to 3 inch male camlock (Cam & Groove). Under no circumstances should cam and groove couplings be used for compressed air or steam service! Connections The male side of this adapter will only connect to 3 inch female camlock How it works To make a connection, simply slide the camlock adapter into the camlock coupling and with normal hand pressure, press the cam levers down. Uncoupling