Ruthex M3 threaded insert – Rx-M3x5.7 - 100 stk. TK2N Low warping and good dimensional

Low warping and good dimensional stability

It provides best-in-class thermal conductivity

Mindre chance for at clogge nozzlen

8 h Printing and storage humidity < 20% RH (closed container with desiccant) Nozzle temperature 220 – 240 °C Bed temperature (with glue) 30 – 35 °C Print speed < 200 mm/s

Stable high-temperature printing performanceOptimized for printing at 260–280 °C with controlled speeds for smooth extrusion and reliable layer adhesion

Ruthex M3 threaded insert – Rx-M3x5.7 - 100 stk. TK2N Low warping and good dimensionalRuthex M3 threaded insert Rx M3x5. 7 100 pcs. Ruthex threaded inserts can subsequently be inserted into parts of 3D printers from e. g. Anycubic, Creality or Prusa using heat or ultrasound. Using heat from a soldering iron or ultrasound, the press fit nuts are simply embedded in a blind or through hole. Threaded inserts for your 3D printed parts Ruthex threaded inserts can subsequently be inserted into parts of 3D printers from e. g. Anycubic,