3pi+ 2040 Robot Kit with 15:1 HPCB Motors (Hyper Edition Kit) Spedizione:1 Giorno The power good indicator is

The power good indicator is held low until the output reaches 95% of the nominal voltage when it is powering up or coming out of low-power mode

The board comes with input reverse voltage protection with a green and red status LEDs (green means power is connected properly

but you could also use this for wearables or any project that wants to track height-above-sea-level

Default mode is serial communication

Gear ratio: 131:1 Free-run speed @ 6V: 40rpm 2 Free-run current @ 6V: 250mA 2 Stall current @ 6V: 2500mA 2 Stall torque @ 6V: 125 oz in 2 Free-run speed @ 12V: 80 rpm Free-run current @ 12V: 300 mA Stall current @ 12V: 5000 mA Stall torque @ 12V: 250 oz·in Lead length: 11 in Notes:

3pi+ 2040 Robot Kit with 15:1 HPCB Motors (Hyper Edition Kit) Spedizione:1 Giorno The power good indicator isThe Pololu 3pi+ 2040 robot is a palm sized, high performance mobile platform based on the Raspberry Pi RP2040 MCU, and this kit contains all the parts you need to build the Hyper Edition version, including a pair of 15: 1 HPCB 6V Micro Metal Gearmotors. This product is a kit; assembly (including soldering) is required. NOTE: This version is difficult to control and fast enough to damage itself from impacts, so it is only recommended for advanced