Wall Power Adapter: 5.15VDC, 2.5A, USB Micro-B Connector, 18AWG 1.5m Cable POL_Force-Sensing Resistors and Linear Potentiometers While the DO and ERR

While the DO and ERR pins are not required to use this driver

It supports a wide 8 V to 50 V operating voltage range and can deliver up to 4 A continuous per phase without a heat sink or forced air flow (6 A max with sufficient additional cooling)

Minimal wiring diagram (5 V systems only)

Traditional LED strips

We switched to USB-C to allow you to bring more current to your servos than ever before

Wall Power Adapter: 5.15VDC, 2.5A, USB Micro-B Connector, 18AWG 1.5m Cable POL_Force-Sensing Resistors and Linear Potentiometers While the DO and ERRThis UL listed 12. 9 W , wall wart style switching power adapter supplies up to 2. 5 A at a regulated 5. 15 VDC . It is intended for use with 5 V USB devices, and it has been specifically designed to supply slightly more than 5 V to help ensure that the device it is powering receives close to 5 V even when the current draw is high. The AC adapter works with input voltages of 100 240 VAC and has a 1. 5 m (5 ft) DC power cord that is terminated by a USB